3rd Edition: Chapter 4

3rd Edition: Chapter 4

Chapter 6 The Link Layer and LANs A note on the use of these Powerpoint slides: Were making these slides freely available to all (faculty, students, readers). Theyre in PowerPoint form so you see the animations; and can add, modify, and delete slides (including this one) and slide content to suit your needs. They obviously represent a lot of work on our part. In return for use, we only ask the following: If you use these slides (e.g., in a class) that you mention their source (after all, wed like people to use our book!) If you post any slides on a www site, that you note that they are adapted from (or perhaps identical to) our slides, and note our copyright of this material. Thanks and enjoy! JFK/KWR All material copyright 1996-2016 J.F Kurose and K.W. Ross, All Rights Reserved Computer Networking: A Top Down Approach 7th edition Jim Kurose, Keith Ross Pearson/Addison Wesley April 2016 Link Layer and LANs 6-1 Chapter 6: Link layer and

LANs our goals: understand principles behind link layer services: error detection, correction sharing a broadcast channel: multiple access link layer addressing local area networks: Ethernet, VLANs instantiation, implementation of various link layer technologies Link Layer and LANs 6-2 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs

6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-3 Link layer: introduction Link Layer and LANs 6-4 Link layer: introduction terminology: hosts and routers: nodes communication channels that connect adjacent nodes along

communication path: links wired links wireless links LANs layer-2 packet: frame, data-link layer has responsibility of encapsulates datagram transferring datagram from one node to physically adjacent node over a link Link Layer and LANs 6-5 Link layer: context datagram transferred by different link protocols over different links: e.g., Ethernet on first link, frame relay on intermediate links, Wireless on last link each link protocol provides different services e.g., may or may not provide rdt over link Link Layer and LANs 6-6 Link layer services framing, link access:

encapsulate datagram into frame, adding header, trailer channel access if shared medium MAC addresses used in frame headers to identify source, destination different from IP address! reliable delivery between adjacent nodes we learned how to do this already (chapter 3)! seldom used on low bit-error link (fiber, some twisted pair) Q: why both link-level and end-end reliability? wireless links: high error rates Link Layer and LANs 6-7 Link layer services (more) flow control: pacing between adjacent sending and receiving nodes error detection: errors caused by signal attenuation, noise. receiver detects presence of errors:

signals sender for retransmission or drops frame error correction: receiver identifies and corrects bit error(s) without resorting to retransmission half-duplex and full-duplex with half duplex, nodes at both ends of link can transmit, but not at same time Link Layer and LANs 6-8 Where is the link layer implemented? in each and every host link layer implemented in adaptor (aka network interface card NIC) or on a chip attaches into hosts system buses Ethernet card, 802.11 card; Ethernet chipset implements link, physical layer cpu

memory controller host bus (e.g., PCI) physical transmission network adapter card Link Layer and LANs 6-9 Where is the link layer implemented? in each and every host link layer implemented in adaptor (aka network interface card NIC) or on a chip attaches into hosts system buses Ethernet card, 802.11 card; Ethernet chipset

implements link, physical layer combination of hardware, software, firmware application transport network link cpu memory controller link physical host bus (e.g., PCI) physical transmission network adapter card

Link Layer and LANs 6-10 Adaptors communicating datagram datagram controller controller sending host receiving host datagram frame sending side: encapsulates datagram in frame adds error checking bits, rdt, flow control, etc. receiving side looks for errors, rdt, flow control, etc.

extracts datagram, passes to upper layer at receiving side Link Layer and LANs 6-11 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP

Ethernet switches VLANS Link Layer and LANs 6-12 Error detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields Link Layer and LANs 6-13 Error detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields otherwise Link Layer and LANs 6-14 Error detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields otherwise Link Layer and LANs 6-15 Error detection

EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields otherwise Link Layer and LANs 6-16 Error detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields otherwise Link Layer and LANs 6-17 Error detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields Error detection not 100% reliable! protocol may miss some errors, but rarely larger EDC field yields better detection and correction otherwise Link Layer and LANs 6-18 Parity checking single bit parity:

detect single bit errors 1 even parity = even number of ones * Check out the online interactive exercises for more examples: http://gaia.cs.umass.edu/kurose_ross/interactive/ Link Layer and LANs 6-19 Parity checking single bit parity: two-dimensional bit parity: detect single bit errors detect and correct single bit errors 0 * Check out the online interactive exercises for more examples: http://gaia.cs.umass.edu/kurose_ross/interactive/

0 Link Layer and LANs 6-20 Internet checksum (review) goal: detect errors (e.g., flipped bits) in transmitted packet (note: used at transport layer only) receiver: sender: compute checksum of treat segment received segment contents as check if computed sequence of 16-bit integers checksum equals checksum: addition checksum field value: (1s complement NO - error detected sum) of segment YES - no error contents detected. But

sender puts maybe errors checksum value nonetheless? into UDP checksum field Link Layer and LANs 6-21 Cyclic redundancy check more powerful error-detection coding view data bits, D, as a binary number choose r+1 bit pattern (generator), G Link Layer and LANs 6-22 CRC example want: D.2r XOR R = nG equivalently: D.2r = nG XOR R equivalently: if we divide D.2r by G, want remainder R to satisfy: R = remainder[ D.2r

] G * Check out the online interactive exercises for more examples: http://gaia.cs.umass.edu/kurose_ross/interactive/ 101110 011 data CRC Cyclic redundancy check more powerful error-detection coding view data bits, D, as a binary number choose r+1 bit pattern (generator), G goal: choose r CRC bits, R, such that exactly divisible by G (modulo 2) receiver knows G, divides by G. If non-zero remainder: error detected! can detect all burst errors less than r+1 bits widely used in practice (Ethernet, 802.11 WiFi, ATM)

Link Layer and LANs 6-24 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-25

Multiple access links, protocols two types of links: point-to-point PPP for dial-up access point-to-point link between Ethernet switch, host broadcast (shared wire or medium) old-fashioned Ethernet upstream HFC 802.11 wireless LAN shared wire (e.g., cabled Ethernet) shared RF (e.g., 802.11 WiFi) shared RF (satellite) humans at a cocktail party (shared air, acoustical) Link Layer and LANs 6-26 Multiple access protocols

single shared broadcast channel two or more simultaneous transmissions by nodes: interference: collision if node receives two or more signals at the same time multiple access protocol distributed algorithm that determines how nodes share channel, i.e., determine when node can transmit communication about channel sharing must use channel itself! no out-of-band channel for coordination Link Layer and LANs 6-27 An ideal multiple access protocol given: broadcast channel of rate R bps desiderata: 1. when one node wants to transmit, it can send at rate R. 2. when M nodes want to transmit, each can send at average rate R/M 3. fully decentralized: no special node to coordinate transmissions no synchronization of clocks, slots 4. simple

Link Layer and LANs 6-28 MAC protocols: taxonomy three broad classes: random access channel not divided, allow collisions recover from collisions channel partitioning divide channel into smaller pieces (time slots, frequency, code) allocate piece to node for exclusive use taking turns nodes take turns, but nodes with more to send can take longer turns Link Layer and LANs 6-29 CSMA (carrier sense multiple access) CSMA: listen before transmit: if channel sensed idle: transmit entire frame if channel sensed busy, defer transmission human analogy: dont interrupt others!

Link Layer and LANs 6-30 CSMA collisions spatial layout of nodes collisions can still occur: propagation delay means two nodes may not hear each others transmission collision: entire packet transmission time wasted distance & propagation delay play role in in determining collision probability Link Layer and LANs 6-31 CSMA/CD (collision detection) CSMA/CD: carrier sensing, deferral as in CSMA

collisions detected within short time colliding transmissions aborted, reducing channel wastage collision detection: easy in wired LANs: measure signal strengths, compare transmitted, received signals difficult in wireless LANs: received signal strength overwhelmed by local transmission strength human analogy: the polite conversationalist Link Layer and LANs 6-32 CSMA/CD (collision detection) spatial layout of nodes Link Layer and LANs 6-33 Ethernet CSMA/CD algorithm 1. NIC receives datagram from network layer, creates frame

2. If NIC senses channel idle, starts frame transmission. If NIC senses channel busy, waits until channel idle, then transmits. 3. If NIC transmits entire frame without detecting another transmission, NIC is 4. If NIC detects another transmission while transmitting, aborts and sends jam signal 5. After aborting, NIC enters binary (exponential) backoff: after mth collision, NIC chooses K at random from {0,1,2, , 2m-1}. NIC waits Link K512

bit Layer and LANs 6-34 CSMA/CD efficiency Tprop = max prop delay between 2 nodes in LAN ttrans = time to transmit max-size frame 1 efficiency 1 5t prop /ttrans efficiency goes to 1 as tprop goes to 0 as ttrans goes to infinity better performance than ALOHA: and simple, cheap, decentralized! Link Layer and LANs 6-35 Slotted ALOHA assumptions: operation: all frames same size when node obtains fresh time divided into frame, transmits in next

slot equal size slots (time to transmit 1 frame) if no collision: node nodes start to can send new frame transmit only slot in next slot beginning if collision: node nodes are retransmits frame in synchronized each subsequent slot if 2 or more nodes with prob. p until transmit in slot, all success nodes detect collision Link Layer and LANs 6-36 Slotted ALOHA node 1 1 1

node 2 2 2 node 3 3 C 1 1 2 3 E C S E C

3 E S S Pros: Cons: single active node can continuously transmit at full rate of channel highly decentralized: only slots in nodes need to be in sync simple collisions, wasting slots idle slots nodes may be able to detect collision in less than time to transmit packet

clock Link Layer and LANs 6-37 Slotted ALOHA: efficiency efficiency: long-run fraction of successful slots (many nodes, all with many frames to send) suppose: N nodes with many frames to send, each transmits in slot with probability p prob that given node has success in a slot = p(1-p)N-1 prob that any node has a success = Np(1-p)N-1 max efficiency: find p* that maximizes Np(1-p)N-1 for many nodes, take limit of Np*(1-p*)N-1

as N goes to infinity, gives: max efficiency = 1/e = .37 at best: channel used for useful transmissions 37% of time! ! Link Layer and LANs 6-38 Pure (unslotted) ALOHA unslotted Aloha: simpler, no synchronization when frame first arrives transmit immediately collision probability increases: frame sent at t0 collides with other frames sent in [t0-1,t0+1] Link Layer and LANs 6-39 Pure ALOHA efficiency

P(success by given node) = P(node transmits) . P(no other node transmits in [t01,t0] . P(no other node transmits in [t01,t0] = p . (1-p)N-1 . (1-p)N-1 = p . (1-p)2(N-1) choosing optimum p and then letting n = 1/(2e) = .18 even worse than slotted Aloha! Link Layer and LANs 6-40 Channel partitioning MAC protocols: TDMA TDMA: time division multiple access access to channel in "rounds" each station gets fixed length slot (length = packet transmission time) in each round unused slots go idle example: 6-station LAN, 1,3,4 have packets to send, slots 2,5,6 idle 6-slot frame 6-slot

frame 1 3 4 1 3 4 Link Layer and LANs 6-41 Channel partitioning MAC protocols: FDMA FDMA: frequency division multiple access channel spectrum divided into frequency bands each station assigned fixed frequency band unused transmission time in frequency bands go idle example: 6-station LAN, 1,3,4 have packet to send, frequency bands 2,5,6 idle FDM cable frequency bands

time Link Layer and LANs 6-42 Taking turns MAC protocols polling: master node invites slave nodes to transmit in turn typically used with dumb slave devices concerns: polling overhead latency single point of failure (master) data poll master data

slaves Link Layer and LANs 6-43 Taking turns MAC protocols token passing: control token passed from one node to next sequentially. token message concerns: token overhead latency single point of failure (token) T (nothing to send) T data Link Layer and LANs 6-44

Cable access network Internet frames, TV channels, control transmitted downstream at different frequencies cable headend CMTS cable modem termination system ISP splitter cable modem upstream Internet frames, TV control, transmitted upstream at different frequencies in time slots

multiple 40Mbps downstream (broadcast) channels single CMTS transmits into channels multiple 30 Mbps upstream channels multiple access: all users contend for certain upstream channel time slots (others assigned) Link Layer and LANs 6-45 Cable access network cable headend MAP frame for Interval [t1, t2] Downstream channel i CMTS Upstream channel j t1 Minislots containing minislots request frames t2 Residences with cable modems

Assigned minislots containing cable modem upstream data frames DOCSIS: data over cable service interface spec FDM over upstream, downstream frequency channels TDM upstream: some slots assigned, some have contention downstream MAP frame: assigns upstream Link Layer and LANs 6-46 Summary of MAC protocols random access (dynamic), ALOHA, S-ALOHA, CSMA, CSMA/CD carrier sensing: easy in some technologies (wire), hard in others (wireless) CSMA/CD used in Ethernet CSMA/CA used in 802.11 channel partitioning, by time, frequency or code Time Division, Frequency Division taking turns polling from central site, token passing

Bluetooth, FDDI, token ring Link Layer and LANs 6-47 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-48

MAC addresses and ARP 32-bit IP address: network-layer address for interface used for layer 3 (network layer) forwarding MAC (or LAN or physical or Ethernet) address: function: used locally to get frame from one interface to another physically-connected interface (same network, in IP-addressing sense) 48 bit MAC address (for most LANs) burned in NIC ROM, also sometimes software settable (base 16) notation hexadecimal e.g.: 1A-2F-BB-76-09-AD (each numeral represents 4 bits) Link Layer and LANs 6-49 MAC addresses and ARP each adapter on LAN has unique MAC address 1A-2F-BB-76-09-AD LAN

(wired or wireless) 71-65-F7-2B-08-53 adapter 58-23-D7-FA-20-B0 0C-C4-11-6F-E3-98 Link Layer and LANs 6-50 MAC addresses (more) MAC address allocation administered by IEEE manufacturer buys portion of MAC address space (to assure uniqueness) analogy: MAC address: like Social Security Number IP address: like postal address MAC flat address portability can move LAN card from one LAN to another IP hierarchical address not portable address depends on IP subnet to which node is attached

Link Layer and LANs 6-51 ARP: address resolution protocol Question: how to determine interfaces MAC address, knowing its IP address? 137.196.7.78 1A-2F-BB-76-09-AD 137.196.7.23 137.196.7.14 LAN 71-65-F7-2B-08-53 58-23-D7-FA-20-B0 0C-C4-11-6F-E3-98 137.196.7.88 ARP table: each IP node (host, router) on LAN has table IP/MAC address mappings for some LAN nodes: < IP address; MAC address; TTL>

TTL (Time To Live): time after which address mapping will be forgotten (typically 20 min) Link Layer and LANs 6-52 ARP protocol: same LAN A wants to send datagram to B Bs MAC address not in As ARP table. A broadcasts ARP query packet, containing B's IP address destination MAC address = FF-FF-FF-FFFF-FF all nodes on LAN receive ARP query B receives ARP packet, replies to A with its (B's) MAC address frame sent to As MAC

A caches (saves) IPto-MAC address pair in its ARP table until information becomes old (times out) soft state: information that times out (goes away) unless refreshed ARP is plug-andplay: nodes create their ARP tables without intervention from net administrator Link Layer and LANs 6-53 Addressing: routing to another LAN walkthrough: send datagram from A to B via R focus on addressing at IP (datagram) and MAC layer (frame) assume A knows Bs IP address assume A knows IP address of first hop router, R (how?) assume A knows Rs MAC address (how?) A

111.111.111.111 74-29-9C-E8-FF-55 R B 222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B 222.222.222.221 88-B2-2F-54-1A-0F Link Layer and LANs 6-54 Addressing: routing to another LAN A creates IP datagram with IP source A, destination B A creates link-layer frame with R's MAC address as destination address, frame contains A-to-B IP datagram MAC src: 74-29-9C-E8-FF-55

MAC dest:E6-E9-00-17-BB-4B ? IP src: 111.111.111.111 IP dest: 222.222.222.222 IP Eth Phy A 111.111.111.111 74-29-9C-E8-FF-55 R B 222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B 222.222.222.221

88-B2-2F-54-1A-0F Link Layer and LANs 6-55 Addressing: routing to another LAN frame sent from A to R frame received at R, datagram removed, passed up to IP MAC src: 74-29-9C-E8-FF-55 MAC dest: E6-E9-00-17-BB-4B IP src: 111.111.111.111 IP dest: 222.222.222.222 IP src: 111.111.111.111 IP dest: 222.222.222.222 IP Eth Phy A 111.111.111.111 74-29-9C-E8-FF-55 IP Eth Phy R

B 222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B 222.222.222.221 88-B2-2F-54-1A-0F Link Layer and LANs 6-56 Addressing: routing to another LAN R forwards datagram with IP source A, destination B R creates link-layer frame with B's MAC address as destination address, frame contains A-to-B IP datagram MAC src: 1A-23-F9-CD-06-9B MAC dest: 49-BD-D2-C7-56-2A IP src: 111.111.111.111 IP dest: 222.222.222.222

IP Eth Phy A 111.111.111.111 74-29-9C-E8-FF-55 R IP Eth Phy B 222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B 222.222.222.221 88-B2-2F-54-1A-0F

Link Layer and LANs 6-57 Addressing: routing to another LAN R forwards datagram with IP source A, destination B R creates link-layer frame with B's MAC address as destination address, frame contains A-to-B IP datagram MAC src: 1A-23-F9-CD-06-9B MAC dest: 49-BD-D2-C7-56-2A IP src: 111.111.111.111 IP dest: 222.222.222.222 IP Eth Phy A 111.111.111.111 74-29-9C-E8-FF-55 R IP Eth Phy B

222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B 222.222.222.221 88-B2-2F-54-1A-0F Link Layer and LANs 6-58 Addressing: routing to another LAN R forwards datagram with IP source A, destination B R creates link-layer frame with B's MAC address as dest, frame contains A-to-B IP datagram MAC src: 1A-23-F9-CD-06-9B MAC dest: 49-BD-D2-C7-56-2A IP src: 111.111.111.111 IP dest: 222.222.222.222 IP Eth

Phy A 111.111.111.111 74-29-9C-E8-FF-55 R B 222.222.222.222 49-BD-D2-C7-56-2A 222.222.222.220 1A-23-F9-CD-06-9B 111.111.111.112 CC-49-DE-D0-AB-7D 111.111.111.110 E6-E9-00-17-BB-4B * Check out the online interactive exercises for more examples: http://gaia.cs.umass.edu/kurose_ross/interactive/ 222.222.222.221 88-B2-2F-54-1A-0F Link Layer and LANs 6-59

Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-60 Ethernet dominant wired LAN technology:

single chip, multiple speeds (e.g., Broadcom BCM5761) first widely used LAN technology simpler, cheap kept up with speed race: 10 Mbps 10 Gbps Metcalfes Ethernet sketch Link Layer and LANs 6-61 Ethernet: physical topology bus: popular through mid 90s all nodes in same collision domain (can collide with each other) star: prevails today active switch in center each spoke runs a (separate) Ethernet protocol (nodes do not collide with each other) switch bus: coaxial cable star Link Layer and LANs 6-62

Ethernet frame structure sending adapter encapsulates IP datagram (or other network layer protocol packet) type in Ethernet frame dest. source preamble address address data (payload) CRC preamble: 7 bytes with pattern 10101010 followed by one byte with pattern 10101011 used to synchronize receiver, sender clock rates Link Layer and LANs 6-63 Ethernet frame structure (more) addresses: 6 byte source, destination MAC addresses if adapter receives frame with matching

destination address, or with broadcast address (e.g. ARP packet), it passes data in frame to network layer protocol otherwise, adapter discards frame type: indicates higher layer protocol (mostly IP but others possible, e.g., Novell IPX, AppleTalk) CRC: cyclic redundancy check at receiver type dest. source error data detected: frame is dropped preamble address address (payload) CRC Link Layer and LANs 6-64 Ethernet: unreliable, connectionless

connectionless: no handshaking between sending and receiving NICs unreliable: receiving NIC doesn't send acks or nacks to sending NIC data in dropped frames recovered only if initial sender uses higher layer rdt (e.g., TCP), otherwise dropped data lost Ethernets MAC protocol: unslotted CSMA/CD with binary backoff Link Layer and LANs 6-65 802.3 Ethernet standards: link & physical layers many different Ethernet standards common MAC protocol and frame format different speeds: 2 Mbps, 10 Mbps, 100 Mbps, 1Gbps, 10 Gbps, 40 Gbps different physical layer media: fiber, cable application transport network link physical MAC protocol and frame format

100BASE-TX 100BASE-T2 100BASE-FX 100BASE-T4 100BASE-SX 100BASE-BX copper (twister pair) physical layer fiber physical layer Link Layer and LANs 6-66 Ethernet dominant wired LAN technology: single chip, multiple speeds (e.g., Broadcom BCM5761) first widely used LAN technology simpler, cheap kept up with speed race: 10 Mbps 10 Gbps Metcalfes Ethernet sketch Link Layer and LANs 6-67

Ethernet: physical topology bus: popular through mid 90s all nodes in same collision domain (can collide with each other) star: prevails today active switch in center each spoke runs a (separate) Ethernet protocol (nodes do not collide with each other) switch bus: coaxial cable star Link Layer and LANs 6-68 Ethernet frame structure sending adapter encapsulates IP datagram (or other network layer protocol packet) type in Ethernet frame dest. source

preamble address address data (payload) CRC preamble: 7 bytes with pattern 10101010 followed by one byte with pattern 10101011 used to synchronize receiver, sender clock rates Link Layer and LANs 6-69 Ethernet frame structure (more) addresses: 6 byte source, destination MAC addresses if adapter receives frame with matching destination address, or with broadcast address (e.g. ARP packet), it passes data in frame to network layer protocol otherwise, adapter discards frame type: indicates higher layer protocol (mostly IP but others possible, e.g., Novell IPX, AppleTalk)

CRC: cyclic redundancy check at receiver type dest. source error data detected: frame is dropped preamble address address (payload) CRC Link Layer and LANs 6-70 Ethernet: unreliable, connectionless connectionless: no handshaking between sending and receiving NICs unreliable: receiving NIC doesn't send acks or nacks to sending NIC data in dropped frames recovered only if initial sender uses higher layer rdt (e.g., TCP), otherwise dropped data lost Ethernets MAC protocol: unslotted

CSMA/CD with binary backoff Link Layer and LANs 6-71 802.3 Ethernet standards: link & physical layers many different Ethernet standards common MAC protocol and frame format different speeds: 2 Mbps, 10 Mbps, 100 Mbps, 1Gbps, 10 Gbps, 40 Gbps different physical layer media: fiber, cable application transport network link physical MAC protocol and frame format 100BASE-TX 100BASE-T2 100BASE-FX 100BASE-T4

100BASE-SX 100BASE-BX copper (twister pair) physical layer fiber physical layer Link Layer and LANs 6-72 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life

of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-73 Ethernet switch link-layer device: takes an active role store, forward Ethernet frames examine incoming frames MAC address, selectively forward frame to one-or-more outgoing links when frame is to be forwarded on segment, uses CSMA/CD to access segment transparent hosts are unaware of presence of switches plug-and-play, self-learning switches do not need to be configured Link Layer and LANs 6-74 Switch: multiple simultaneous transmissions hosts have dedicated, direct connection to switch

switches buffer packets Ethernet protocol used on each incoming link, but no collisions; full duplex each link is its own collision domain switching: A-to-A and Bto-B can transmit simultaneously, without collisions A B C 6 1 2 4 5 B 3 C A

switch with six interfaces (1,2,3,4,5,6) Link Layer and LANs 6-75 Switch forwarding table Q: how does switch know A reachable via interface 4, B reachable via A: each5? interface switch has a switch table, each entry: A B (MAC address of host, interface to reach host, time stamp) looksare likeentries a routing table! Q:how created,

maintained in switch table? something like a routing protocol? B C 6 1 2 4 5 3 C A switch with six interfaces (1,2,3,4,5,6) Link Layer and LANs 6-76 Switch: self-learning

A B C 6 1 2 4 5 B 3 C A Link Layer and LANs 6-77 Switch: self-learning Source: A Dest: A A

A A B C 1 6 2 4 5 B 3 C A MAC addr interface A 1 TTL 60 Switch table (initially empty)

Link Layer and LANs 6-78 Switch: self-learning switch learns which hosts can be reached through which interfaces when frame received, switch learns location of sender: incoming LAN segment records sender/location pair in switch table MAC addr A A B C 1 6 A A 5

2 4 B 3 C A interface TTL 1 60 Switch table (initially empty) Link Layer and LANs 6-79 Self-learning, forwarding: example frame destination, A, location flood unknown:

destination A locationselectively known: send on just one link Source: A Dest: A A A A B C 1 6 2 A A 4 5 B 3

C A A A MAC addr interface A A 1 4 TTL 60 60 switch table (initially empty) Link Layer and LANs 6-80 Switch: frame filtering/forwarding when frame received at switch: 1. record incoming link, MAC address of sending host 2. index switch table using MAC destination address

3. if entry found for destination then { if destination on segment from which frame arrived then drop frame else forward frame on interface indicated by entry } else flood /* forward on all interfaces except Link Layer and LANs 6-81 Interconnecting switches self-learning switches can be connected together: S4 S1 S3 S2 A B C

F D E I G H Q: sending from A to G - how does S1 know to forward frame destined to G via S4 and S3? A: self learning! (works exactly the same as in single-switch case!) Link Layer and LANs 6-82 Self-learning multi-switch example Suppose C sends frame to I, I responds to C S4 S1 S3 S2 A

B C F D E I G H Q: show switch tables and packet forwarding in S1, S2, S3, S4 Link Layer and LANs 6-83 Institutional network mail server to external network router web server

IP subnet Link Layer and LANs 6-84 Switches vs. routers both are store-andforward: routers: network-layer devices (examine network-layer headers) switches: link-layer devices (examine linklayer headers) both have forwarding tables: routers: compute tables using routing algorithms, IP addresses switches: learn application transport datagram network frame link physical

frame link physical switch network datagram link frame physical application transport network link physical Link Layer and LANs 6-85 Switch Plug and play no routing algorithm needed Only layer-2 processing needed Loops can cause problems, network restricted to a spanning tree topology Uses MAC addresses,

no hierarchy, cannot handle large vs Router Routing and configuration complexity Need processing upto layer-3 Handles any generic network topology with loops and redundancy Uses IP addresses, the logical hierarchy manages large 5-86 VLANs: motivation consider: Computer Science Electrical Engineering Computer

Engineering CS user moves office to EE, but wants connect to CS switch? single broadcast domain: all layer-2 broadcast traffic (ARP, DHCP, unknown location of destination MAC address) must cross entire LAN security/privacy, efficiency issues Link Layer and LANs 6-87 VLANs Virtual Local Area Network switch(es) supporting VLAN capabilities can be configured to define multiple virtual LANS over single physical LAN

infrastructure. port-based VLAN: switch ports grouped (by switch management software) so that single physical switch 1 7 9 15 2 8 10 16 Electrical Engineering

(VLAN ports 1-8) Computer Science (VLAN ports 9-15) operates as multiple virtual switches 1 7 9 15 2 8 10 16 Electrical Engineering (VLAN ports 1-8)

Computer Science (VLAN ports 9-16) Link Layer and LANs 6-88 Port-based VLAN router traffic isolation: frames to/from ports 1-8 can only reach ports 1-8 can also define VLAN based on MAC addresses of endpoints, rather than switch port 1 7 9 15 2 8 10

16 dynamic membership: ports can be dynamically assigned Electrical Engineering (VLAN ports 1-8) among VLANs forwarding between VLANS: done via routing (just as with separate switches) Computer Science (VLAN ports 9-15) in practice vendors sell combined switches plus routers Link Layer and LANs 6-89 VLANS spanning multiple switches VLANS spanning multiple switches 1

7 9 15 1 3 5 7 2 8 10 16 2 4 6

8 Electrical Engineering (VLAN ports 1-8) Computer Science (VLAN ports 9-15) Ports 2,3,5 belong to EE VLAN Ports 4,6,7,8 belong to CS VLAN trunk port: carries frames between VLANS defined over multiple physical switches frames forwarded within VLAN between switches cant be vanilla 802.1 frames (must carry VLAN ID info) 802.1q protocol adds/removed additional header fields for frames forwarded between trunk ports Link Layer and LANs 6-91 802.1Q VLAN frame format type preamble dest.

address source address data (payload) CRC 802.1 frame type preamble dest. address source address data (payload) 2-byte Tag Protocol Identifier (value: 81-00) CRC 802.1Q frame

Recomputed CRC Tag Control Information (12 bit VLAN ID field, 3 bit priority field like IP TOS) Link Layer and LANs 6-92 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request

addressing, ARP Ethernet switches VLANS Link Layer and LANs 6-93 Multiprotocol label switching (MPLS) initial goal: high-speed IP forwarding using fixed length label (instead of IP address) fast lookup using fixed length identifier (rather than shortest prefix matching) borrowing ideas from Virtual Circuit (VC) approach but IP datagram still keeps IP address! PPP or Ethernet header MPLS header label 20 IP header

remainder of link-layer frame Exp S TTL 3 1 5 Link Layer and LANs 6-94 MPLS capable routers a.k.a. label-switched router forward packets to outgoing interface based only on label value (dont inspect IP address) MPLS forwarding table distinct from IP forwarding tables flexibility: MPLS forwarding decisions can differ from those of IP use destination and source addresses to route flows to same destination differently (traffic engineering) re-route flows quickly if link fails: pre-computed backup paths (useful for VoIP) Link Layer and LANs 6-95 MPLS versus IP paths

R6 D R4 R3 R5 A R2 IP routing: path to destination determined by destination address alone IP router Link Layer and LANs 6-96 MPLS versus IP paths entry router (R4) can use different MPLS routes to A based, e.g., on source address R6 D R4 R3

R5 A R2 IP routing: path to destination determined by destination address alone path to MPLS routing: destination can be based on source and destination address fast reroute: precompute backup routes in case of link failure IP-only router MPLS and IP router Link Layer and LANs 6-97 MPLS forwarding tables in out label label dest interface

10 12 8 out A D A R6 0 0 1 in out label label dest interface 0 R4 R5

10 6 A 1 12 9 D 0 0 1 R3 out D 1

0 0 R2 in out label label dest interface 8 6 A out in outR1 label label dest interface 6 - A

A out 0 0 Link Layer and LANs 6-98 MPLS signaling modify OSPF, IS-IS link-state flooding protocols to carry info used by MPLS routing, e.g.,MPLS link bandwidth, amount of reserved link entry router uses RSVP-TE signaling bandwidth protocol to set up MPLS forwarding at downstream routers RSVP-TE

R6 D R4 R5 modified link state flooding A Link Layer and LANs 6-99 Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 6.4 LANs 6.5 link virtualization:

MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6- Data center networks 10s to 100s of thousands of hosts, often closely coupled, in close proximity: e-business (e.g. Amazon) content-servers (e.g., YouTube, Akamai, Apple, Microsoft) search engines, data mining (e.g., Google) challenges: multiple applications, each serving massive numbers of clients managing/balancing load, avoiding processing, networking,

data bottlenecks Inside a 40-ft Microsoft container, Chicago data center Link Layer and LANs 6- Data center networks load balancer: application-layer routing receives external client requests directs workload within data center returns results to external client (hiding data center internals from Border router client) Internet Load balancer Access router Tier-1 switches B A

Load balancer Tier-2 switches C TOR switches Server racks 1 2 3 4 5 6 7 8 Link Layer and LANs 6- Data center networks

rich interconnection among switches, racks: increased throughput between racks (multiple routing paths possible) increased reliability via redundancy Tier-1 switches Tier-2 switches TOR switches Server racks 1 2 3 4 5 6 7 8 Link Layer and LANs 6-

Link layer, LANs: outline 6.1 introduction, services 6.2 error detection, correction 6.3 multiple access protocols 64 LANs 6.5 link virtualization: MPLS 6.6 data center networking 6.7 a day in the life of a web request addressing, ARP Ethernet switches VLANS Link Layer and LANs 6- Synthesis: a day in the life of a web request

journey down protocol stack complete! application, transport, network, link putting-it-all-together: synthesis! goal: identify, review, understand protocols (at all layers) involved in seemingly simple scenario: requesting www page scenario: student attaches laptop to campus network, requests/receives www.google.com Link Layer and LANs 6- A day in the life: scenario DNS server browser Comcast network 68.80.0.0/13 school network 68.80.2.0/24 web page web server 64.233.169.105 Googles network

64.233.160.0/19 Link Layer and LANs 6- A day in the life connecting to the Internet DHCP UDP IP Eth Phy DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP UDP IP Eth

Phy router (runs DHCP) connecting laptop needs to get its own IP address, addr of firsthop router, addr of DNS server: use DHCP DHCP request encapsulated in UDP, encapsulated in IP, encapsulated in 802.3 Ethernet Ethernet frame broadcast (dest: FFFFFFFFFFFF) on LAN, received at router running DHCP server Ethernet demuxed to IP demuxed, UDP demuxed to DHCP Link Layer and LANs 6- A day in the life connecting to the

Internet DHCP UDP IP Eth Phy DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP DHCP UDP IP Eth Phy router (runs DHCP) DHCP server

formulates DHCP ACK containing clients IP address, IP address of first-hop router for client, name & IP address of DNS encapsulation atserver DHCP server, frame forwarded (switch learning) through LAN, demultiplexing at DHCP client client receives DHCP ACK reply Client now has IP address, knows name & addr of DNS server, IP address of its first-hop router Link Layer and LANs 6- A day in the life ARP (before DNS, before HTTP) DNS DNS DNS ARP query

before sending HTTP request, need IP address of www.google.com: DNS DNS UDP IP ARP Eth Phy ARP ARP reply Eth Phy router (runs DHCP) DNS query created, encapsulated in UDP, encapsulated in IP, encapsulated in Eth. To send frame to router, need address of router MAC ARP query

broadcast, interface: ARP received by router, which replies with ARP reply giving MAC address of router interface client now knows MAC address of first hop router, so can now send frame containing DNS query Link Layer and LANs 6- A day in the life using DNSDNS DNS DNS DNS DNS DNS DNS DNS UDP IP Eth Phy

DNS DNS DNS UDP IP Eth Phy DNS server Comcast network 68.80.0.0/13 router (runs DHCP) IP datagram containing DNS query forwarded via LAN switch from client to 1st hop router IP datagram forwarded from campus network into Comcast network, routed (tables created by RIP,

OSPF, IS-IS and/or BGP routing protocols) demuxed to DNS to DNS server server DNS server replies to client with IP address Link Layer and LANs 6of www.google.com A day in the lifeTCP connection carrying HTTP HTTP HTTP TCP IP Eth Phy SYNACK SYN SYNACK SYN SYNACK SYN SYNACK

SYN SYNACK SYN SYNACK SYN TCP IP Eth Phy web server 64.233.169.105 router (runs DHCP) to send HTTP request, client first opens TCP socket to web server TCP SYN segment (step 1 in 3-way handshake) inter-domain routed to web server responds with TCP SYNACK (step 2 in 3-way handshake) TCP connection established!

Link Layer and LANs 6- A day in the life HTTP request/reply HTTP HTTP HTTP TCP IP Eth Phy HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP HTTP TCP IP

Eth Phy web server 64.233.169.105 web page finally (!!!) displayed router (runs DHCP) HTTP request sent into TCP socket IP datagram containing HTTP request routed to www.google.com web server responds with HTTP reply (containing web page) IP datagram containing HTTP reply routed back to client Link Layer and LANs 6- Chapter 6: Summary principles behind data link layer services: error detection, correction

sharing a broadcast channel: multiple access link layer addressing instantiation and implementation of various link layer technologies Ethernet switched LANS, VLANs virtualized networks as a link layer: MPLS synthesis: a day in the life of a web request Link Layer and LANs 6- Chapter 6: lets take a breath journey down protocol stack complete (except PHY) solid understanding of networking principles, practice .. could stop here . but lots of interesting topics! wireless multimedia security Link Layer and LANs 6-

Recently Viewed Presentations

  • The application of plant biotechnology in seed industry

    The application of plant biotechnology in seed industry

    Heterotic grouping. DNA fingerprinting of inbred lines. DNA fingerprinting of hybrids. Germplasm management . Germplasm characterization . Diversity analysis . Screening for biotic & abiotic stress resistances . Removal of duplicates. Purification of germplasm accessions. Line stabilization. Hybrid seed purity...
  • The United Kingdom and Union Jack - Ingritile

    The United Kingdom and Union Jack - Ingritile

    WALES THE WELSH FLAG THE EMBLEM OF WALES The daffodil is Welshmen`s national emblem. THE BRITISH FLAG IS CALLED UNION JACK It is a combination of three flags:the Saint Andrew`s cross, the Saint Patrick`s cross and the Saint George´s cross....
  • Présentation PowerPoint

    Présentation PowerPoint

    HD audio to maximize audio quality and clarity; full duplexspeakerphone. 5-way audioconferencing for easy conferencecalls. Built-in PoE to power thedevices and give it a networkconnection. Use with Grandstream's UCMseries. IP PBX appliance for Zero-Configprovisioning, 1-touch call recording &more
  • Tragic Heroes - Mira Costa High School

    Tragic Heroes - Mira Costa High School

    Definition of a Tragic Hero A tragic hero has the potential for greatness but is doomed to fall. He is trapped in a situation where he cannot redeem himself. He has some sort of tragic flaw, and this causes his...
  • Evolution of the Precambrian Rocks of Yellowstone National ...

    Evolution of the Precambrian Rocks of Yellowstone National ...

    F2 crenulation fold hinges and L2 mineral lineations plunge shallowly to the N-NE or S-SW. Meter- to regional -scale open fold system (F3) - identified based on poles to foliation with calculated fold axis with trend and plunge of 173/22....
  • How Can We Improve Support for Carers

    How Can We Improve Support for Carers

    we know that being a carer is a unique experience for each individual and would like to know if there is any other type of support your group/individual may have found helpful or that they would like to tell us...
  • Presentación de PowerPoint - OAS

    Presentación de PowerPoint - OAS

    D.S. Nº 90/2000 NORMA DE EMISIÓN DE RILES A CUERPOS DE AGUA SUPERFICIALES NORMATIVA INTERNACIONAL CONVENIO PARA PREVENIR LA CONTAMINACIÓN DEL MAR (MARPOL 73/78) CONVENIO SOBRE COOPERACIÓN PREPARACIÓN Y LUCHA CONTRA LA CONTAMINACIÓN POR HIDROCARBUROS CONVENIO SOBRE COOPERACIÓN PREPARACIÓN Y...
  • Tariff changes support the new values for CONE, Net CONE, and ...

    Tariff changes support the new values for CONE, Net CONE, and ...

    Tariff changes support the new values for CONE, Net CONE, and ORTPs. CONE, Net CONE, and ORTP values that will be used for Capacity Commitment Period beginning June 1, 2021 (FCA 12) must be updated to reflect the new values